Tuesday, October 4, 2022
| No. | Content | Target function | Abstract |
|
1 |
UI Improvement | Data layers |
When deleting data on the Dashboard, a confirmation dialog has been improved. Previously, a confirmation message was simply displayed using the menu. This time, the confirmation dialog has been improved so that it is displayed when deleting data. |
| 2 | Bug fixing | Viewer |
When registering DTM/Ortho data in a project that uses localization, an incorrect projection method was sometimes applied and the data was displayed in a different position than expected. |
| 3 | Bug fixing | Viewer |
When uploading multiple DTM files, the order of the files was sometimes swapped, causing errors in color conversion during the registration process. This has now been corrected so that it is set correctly. |
２_<UI Improvement>
Tuesday, October 18, 2022
| No. | Content | Target function | Abstract |
|
1 |
Performance Improvement |
Data layers |
DTM/Ortho image acquisition speed has been increased by approximately 20%. |
| 2 | Performance Improvement | Data layers |
When an ortho image is imported, a job is executed in the background. In the past, survey data was not imported while this job was running. This time, the job has been modified to run in parallel. |
| 3 | Bug fixing | Data layers |
The order in which various survey data were displayed was sometimes restored after reloading. |
| 4 | Bug fixing | Data layers |
Fixed a case in which the tiling of orthoimages under certain conditions failed. |
Saturday, November 5, 2022
| No. | Content | Target function | Abstract |
|
1 |
Bug fixing |
Data layers |
When uploading DTM files, display problems sometimes occurred, but the data integration process has been improved and they are now displayed properly |
| 2 | Performance Improvement | Data layers |
When measuring polygons, a high load state occurred and the operation speed sometimes decreased, but this time the processing method has been improved to suppress the decrease in operation speed. |
| 3 | UI Improvement | Data layers |
Improved to display a loading icon at the bottom of the screen while the viewer screen is loading. |
| 4 | Bug fixing | Data layers |
Fixed the problem that some icons were not displayed correctly when using Safari. |
| ５ | Others | ー |
he Smart Construction Dashboard icon has been updated. |
１_<Bug fixing>
When uploading DTM files, display problems sometimes occurred, but the data integration process has
been improved and they are now displayed properly.
Example of a display that occurred before the release
３_<UI Improvement>
Improved to display a loading icon at the bottom of the screen while the viewer screen is loading.
A loading icon display image (upper left of the image)
Tuesday, November 22, 2022
| No. | Content | Target function | Abstract |
|
1 |
Performance Improvement |
Data layers |
By reviewing the import process, the time it takes to display after uploading point cloud data has been greatly reduced (average about 40%). |
| 2 | Performance Improvement | Data layers |
When importing a LandXML file with outlines created by external software, the boundaries could appear in unexpected areas. This time, it has been fixed so that it does not create a boundary line for the secondary outline. |
| 3 | UI Improvement | Viewer |
You can now set the zoom position and direction for each project when you click the "Home" icon on the map. |
| 4 | Bug fixing | Data layers |
Although registration of design data with long Japanese names sometimes failed, it has been corrected so that it can be registered correctly. |
| ５ | Bug fixing | Measurement |
When creating an annotation and changing the display order, the changed order could not be saved correctly. This time, I fixed it so that it can be saved correctly. |
| 6 | Bug fixing | Data layers |
When performing data linkage from Propeller's solution (Propeller), data was sometimes registered with incorrect height information, but with this improvement, it can now be read correctly. |
| ７ | Performance Improvement | Data layers |
Coordinates in Trimble reference point files (dc) could be read incorrectly in certain cases. It will be fixed so that it reads correctly this time. |
| ８ | Performance Improvement |
Machines |
Improved the performance of the construction machine list display speed on Smart Construction Dashboard. |
１_<Performance Improvement>
There are two steps to display point cloud data: (1) importing (uploading) point cloud data and (2) displaying
the imported point cloud data on the viewer (tiling).
• This improvement is related to ②. (* ① is highly dependent on communication speed)
• The following data table is a reference value, and the required time may vary depending on factors such as the usage environment.
２_<Performance Improvement>
When design data is created in LandXML format with a specific tool, a supplementary outline may
be created for the drawing. Viewing this data on Smart Construction Dashboard could incorrectly
create borders for secondary perimeters.
Fixed to properly create borders for the original design surface.
original boundaries Incorrectly created border in SCDB before this release
３_<UI Improvement>
You can now freely set the center position, height, direction and angle for zooming when you click the
home icon for each project.
６_<Bug fixing>
When importing DTM/DSM data from the continental United States using Propeller Inc.'s
Propeller, the type of Geoid used did not match, and the height could not be read correctly.
[Vertical Datum]
EPSG 5703 (NAVD88 height)
[Geoid type used by each software]
Dashboard : Geoid18
Propeller : Geoid12b
The geoids that can be used in EPSG 5703 (NAVD88height) are subdivided as shown on the right.
By selecting GEOID12B for the site CRS of the linked project, it is now possible to link correctly.
Comments
0 comments
Please sign in to leave a comment.