Kamari
- Total activity 40
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 19
Articles
Recent activity by Kamari-
How to Plan a 2D Photogrammetry Mission with the Mavic 3 Enterprise
2D Mission Planning 1. Power on your drone and remote controller (RC). 2. Connect your RC to a WiFi network or hotspot to ensure base maps will load to assist with mission planning. To connect to w...
-
How to Plan a 2D Photogrammetry Mission in GS RTK
2D Photogrammetry 1. To begin, power on your controller using the GS RTK app. 2. Connect to a WiFi network or hotspot to ensure base-maps will load to assist with mission planning. 3. From the GS R...
-
Flying Your Drone Safely in the Winter & Inclement Weather
Flying in the winter Keeping your hardware functioning and your data high-quality takes a few extra steps in the winter months. We'll outline the considerations to take into account as you continue...
-
Shutter Priority Mode
Motion blur is a common problem in aerial photogrammetry. It's typically due to a slower shutter speed while the craft is flying quickly. To avoid the motion blur effect, we can set the camera into...
-
Flying at Low Height
If you plan to fly a site survey at a mission height below 260ft (80m), you must make changes to your other mission settings in order to produce usable data. Mission Height We don't recommend f...
-
Best Practices for Formatting the SD Card For Your Drone
You should format your SD card regularly for optimal performance. To get in the habit, we recommend formatting it before the first flight of the day. Before you get started, there are a few things...
-
Which SD Cards Can I Use With My Survey Drones?
A slow SD card can result in missing images and GPS data or corrupt files. SD card quality can vary greatly between models (regardless of the advertised speed). Since the drone is flying quickl...
-
As Built Data: Common Questions
What happens to the as-built captured in the afternoon?- Captured within the prior 24 hours. Example below if you were to set the Daily Sync time to 11:30 am: If the sync time is 11:30a, user will...
-
How to create a new project
Setting up a new project is the initial step when using the Smart Construction Dashboard. This process is essential for every job site. 1. Navigate to Smart Construction Dashboard (www.dashboard.sm...
-
How to change the coordinate system
If the wrong coordinate system was selected during registration, here's how to correct that: 1) Click the "Project settings"① in the left menu item. 2) Select "Coordinate system"➁. 3) Click "Conf...