Can't Clear Magnetic Interference from Drone

If you can't clear magnetic interference from drone, troubleshoot by following the steps below.

Step 1. Make sure the drone is 2M (6 feet) from the nearest metal object when the drone is turned on.

Step 2. With your left index finger, there is a metal tab on the upper left corner of the drone; slide this tab back and forth until compass calibration is displayed on the controller. Once it is displayed follow the directions.

Step 3. Select the 3 dots in the upper right hand corner of the screen. Under the drone menu (looks like a flower and is the first menu that pops up) on the right hand side, scroll to the bottom and you'll see "Advanced Setting", select.

• Then tap "Sensors"

• At the bottom of that screen, you should see something that says "Calibrate Compass". Select that and follow the instructions on the screen.

DONE

You can find the visual instructions for step 3 here: https://support.geocue.com/phantom-4-rtk-compass-calibration-instructions/